Product Overview

 

Precast Concrete Residential Buildings utilize engineered, factory-manufactured concrete components to support the offsite construction of single-family homes, townhouses, and low-rise multi-family housing projects. The system integrates load-bearing wall panels, insulated sandwich walls, hollow-core floor slabs, columns, and structural beams into a unified building envelope.
By transferring structural casting from the jobsite to a controlled factory environment, precast construction reduces onsite formwork and cuts assembly timelines by up to 60%. Manufactured under strict quality controls using heavy-duty steel molds, each component arrives jobsite-ready with pre-cast MEP conduits, service penetrations, and lifting hardware matched to project BIM and CAD specifications.

 

 
  • Concrete Family House
    Tired of construction delays that derail timelines, budget overruns that strain resources, and unpredictable quality that risks your investment? Our pre-engineered concrete family home system
  • Concrete Backyard Garden House
    This is a Australia concrete backyard garden house,it is a small house,17sqm,but it have full functions,bedroom,bathroom,kitchen,it can be as a guest room,baby house and so on.
 
 
Key Features and Benefits
 
01/

Factory-Controlled Manufacturing
Precision batching, automated reinforcement placement, and high-rigidity steel forms ensure high surface finish quality and dimensional consistency across mass production runs.

02/

Controlled Tolerances (+/-2mm to +/-3mm)
Laser-guided mold setup minimizes dimensional variance, eliminating on-site fitting issues during crane assembly.

03/

Integrated Building Service Openings
Electrical conduits, junction boxes, plumbing sleeves, and door or window blockouts are pre-cast directly into panels according to approved MEP drawings.

04/

Thermal and Acoustic Insulation
Insulated sandwich wall configurations achieve low thermal transmittance (U-values down to 0.15 W/m2K) and sound reduction indexes exceeding 55 dB.

05/

Fire and Environmental Resistance
Non-combustible concrete mix formulations provide 2 to 4 hour fire endurance (REI 120 to REI 240) while meeting regional wind and seismic loading requirements.

06/

Coordinated Onsite Assembly
Component numbering, lifting points, and tongue-and-groove or mechanical joint hardware enable rapid shell erection with reduced jobsite labor.

 

Applications

 

Single-Family Detached Residences

Precision-engineered wall and roof elements designed for rapid assembly of custom or repeat private homes.

Townhouses and Multi-Family Housing

Load-bearing party walls and floor slabs optimized for fire separation and high airborne or impact acoustic insulation between dwelling units.

Concrete Family House

Social and Affordable Housing Projects

Scalable component manufacturing for high-volume housing developments requiring strict cost control and predictable delivery schedules.

Resort and Remote Developments

Pre-assembled modular and panelized units ideal for remote sites where local concrete batching and skilled jobsite labor are limited.

 

 

Technical Specifications and Customization

 

Technical Specifications

Parameter

Standard / Custom Range

Concrete Compressive Strength

C30/37 to C50/60 (EN 206) / 4,000 psi to 8,000 psi (ASTM C39)

Reinforcement Steel

Grade B500B / B500C rebar (EN 10080) or ASTM A615 Grade 60

Dimensional Tolerances

Length/Height: +/-2.0 mm; Thickness: +/-1.5 mm; Diagonal: +/-3.0 mm

Fire Resistance Rating

120 min to 240 min (REI 120 to REI 240) based on structural thickness and cover depth

Sound Insulation (Rw)

52 dB to 62 dB (depending on wall thickness and core density)

Thermal Transmittance (U-Value)

Sandwich Panels: 0.15 to 0.22 W/m2K (with EPS / XPS / PIR cores)

Maximum Panel Dimensions

Height: up to 3.8 m; Length: up to 12.0 m (optimized for container shipping)

Surface Finish Options

Smooth fair-faced mold finish, lightly textured, exposed aggregate, or patterned liner

 

Structural Options and Customization
Wall Configurations
Solid load-bearing walls, non-load-bearing internal partitions, and insulated double or sandwich panels.
Floor and Framing Elements
Hollow-core slabs, solid precast slabs, structural columns, and beams matched to required spans and imposed loads.
MEP Integration
Factory installation of electrical back-boxes, conduits, pipe sleeves, and HVAC blockouts based on coordinated 3D models.
Connection Hardware
Choice of cast-in steel plates, rebar loops, mechanical grouted sleeves, or welded ties verified against local engineering codes.
 

 
 
Manufacturing and Quality Control
Concrete Family House best
01.

Production Workflow

BIM and Shop Drawing Conversion: Architectural and structural CAD files are converted into production shop drawings and 3D IFC models for client review and approval.
Mold Setup and Rebar Fabrication: High-rigidity magnetic steel side-forms are positioned on casting tables; steel reinforcement mesh and cages are CNC-bent and placed with verified concrete cover depth.
Embedded Hardware Placement: Lifting inserts, connection plates, electrical conduits, and service sleeves are fixed in exact positions verified against approved shop drawings.
Batching and Concrete Casting: Concrete is batched under controlled water-cement ratios, slump testing, and automated compaction to eliminate honeycombing.
Curing and Demolding: Components undergo controlled ambient or accelerated steam curing to achieve required release strength before demolding within 12 to 16 hours.
Inspection and Yard Storage: Finished elements undergo 100% dimensional check, surface defect review, labeling, and vertical racking storage in dedicated curing yards.

02.

Quality Assurance Protocols

Raw Material Testing
Sieve analysis of aggregate, cement chemistry verification, and mill test certificate validation for all rebar batches.
Pre-Pour Inspection
Verification of rebar cover depth, embedded hardware alignment, service sleeve placements, and mold tolerances.
Strength Testing
Cube or cylinder compression testing at 1, 7, and 28 days in accordance with project specification standards.
Final Assembly Dry-Fit
Laser measurement and physical dry-fit trials for complex connection interfaces prior to dispatch.

Concrete Family House price

 

Transportation, Delivery and Installation
 

Transport Planning and Containerization

Component dimensions are optimized to fit standard 40ft High Cube (40HC) or Flat-Rack containers to minimize sea freight overheads.

Lifting and Safe Handling

Certified cast-in spherical head lifting anchors (2.5t to 10t capacity) with clearly marked center-of-gravity labels ensure safe crane hoisting on site.

Protection and Packaging

Panel edges receive heavy-duty impact protectors; elements are packed vertically on heavy-duty steel transport frames (A-frames) with timber dunnage and rubber separators to prevent transit abrasion.

Documentation Package

Each shipment includes itemized mark-up erection drawings, panel numbering plans, hardware manifests, joint grouting manuals, and mill test certificates.

 

Related Products
1

Precast Concrete Wall Panels

Load-bearing exterior sandwich walls and interior sound-insulated partitions.

2

Hollow-Core Slabs and Precast Flooring

Lightweight, pre-stressed floor elements for multi-story residential spans.

3

Precast Concrete Columns and Beams

Heavy structural framing elements for multi-family residential frameworks.

4

Precast Concrete Stairs and Landings

Precision-cast access modules ready for immediate site integration.

 

 

FAQ

 

 

Q: What technical information is required to receive an accurate feasibility review and quotation?

A: Please provide project location, architectural drawings, floor plans, building elevation heights, estimated floor count, structural load requirements, and desired delivery schedule. Including preliminary MEP drawings and energy or acoustic performance targets allows our engineering team to provide a detailed component breakdown and connection scheme.

Q: How do you guarantee precast elements match project drawings without site fitting errors?

A: We convert client CAD or BIM models into 3D production shop drawings for formal approval before casting. Molds are set using laser alignment systems maintaining tolerances within +/-2 mm. Critical structural connection nodes undergo 3D digital simulation and pre-dispatch trial fitting.

Q: Can these precast concrete components comply with European or North American building codes?

A: Yes. Material formulations, reinforcement cover, connection details, and structural design calculations can be tailored to Eurocode (EN 1992 / EN 206) or American Concrete Institute (ACI 318) standards. Complete material test reports for concrete compressive strength and steel tensile strength are supplied with every shipment batch.

Q: How are structural and weather joints sealed on site?

A: External panel joints utilize a multi-stage seal system: structural high-strength non-shrink grout on the interior side, continuous elastomeric air and water weatherseal backed by PE foam rods in the outer recess, and continuous insulation overlaps to eliminate thermal bridging.

Q: What is the typical production and ocean transport lead time?

A: Shop drawing conversion and approval take 1 to 2 weeks. Factory mold setup and sample sign-off require 1 week. Batch manufacturing averages 2 to 3 weeks depending on component volume. Ocean freight transit varies by destination port (typically 20 to 35 days to European or North American ports).

Q: Can electrical conduits, plumbing blockouts, and window openings be integrated during casting?

A: Yes. Conduits, back-boxes, pipe sleeves, and window or door blockouts are cast directly into panels based on your approved MEP drawings. Positional coordinates are locked during pre-pour inspection to ensure alignment with site utility hookups.

Q: What parameters drive total product and logistics costs?

A: Total project cost depends on total concrete volume, component geometry repetition, insulation thickness, surface finish selection, connection hardware specifications, containerization efficiency, and shipping destination. Maximizing component standardization across floor plans significantly lowers per-unit mold costs.

Q: How are oversized panels protected against ocean transport damage?

A: Panels are secured on reinforced steel A-frames using heavy-duty webbing straps, neoprene isolation pads, and edge guards. Steel frames are anchored directly to container points, preventing dynamic movement and edge chipping during ocean transport.

As one of the most professional concrete family building manufacturers and suppliers in China, our products have good reputation in the market. Please rest assured to wholesale high quality concrete family building for sale here from our factory. We also accept customized orders.

Concrete Backyard Garden House, Multi family Housing, prefab concrete homes
Send Inquiry